Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: Motorized shutters controlled via Power Relay Module (LQSE-4S10-D)

  1. #1

    Motorized shutters controlled via Power Relay Module (LQSE-4S10-D)

    Hi,

    I'm using this DIN rail module to control 2 motorized shutters (UP/Down for 2 shutters). The problem I have is that each shutter now shows ON/OFF buttons for both UP and DOWN functions on the Lutron Home+ app. I'm worried that the client might accidentally push the ON button for say Shutter 1 UP and then the ON button for Shutter 1 DOWN. This is obviously a problem as both those outputs should never be on at the same time as it will burn the shutter motor.

    Is there a way I could add programming to make them mutually exclusive so that if the client switches on the DOWN function, the UP function automatically switches off.

    Hope this makes sense.

    Thanks,
    Et

  2. #2
    Hi Et,

    The LQSE-4S10-D is only designed for switched motor control, I assure you you will burn out motors. Best practice would be to use the LQSE-4M-D, This dpm will control 4 Blinds has jog time, interlock delay and max on time all built in, it rely's on the load information you have given in in loads(Select Motor 3-Wire). This unit will solve all your motor issues, It won't appear amongst the shade groups but I'm certain your shutter motors will last a lot longer.

  3. #3
    Noted. Thank you for the heads up on the LQSE-4M-D. Will swap them out.

  4. #4
    Junior Member
    Join Date
    Jul 2015
    Posts
    15
    The LQSE-4M-D is a good option , but i canīt find it in the equipment list products at the HW QS lutron designer software 9.4, whats the way to desing it ?

  5. #5
    It might not be available depending on what region you're in(Check your toolbox to see what DIN rail modules are available to you), you should be able to use a HW-RPM-4M which which will give you the same results if the DIN rail version is not available to you.

Similar Threads

  1. Wallbox Power Module & 7.7
    By paulhanks in forum Programming - RA2
    Replies: 14
    Last Post: 08-02-2019, 12:38 AM
  2. LED on wallbox power module
    By MitchE in forum Design Assistance - RA2
    Replies: 5
    Last Post: 10-24-2014, 01:44 AM
  3. LQSE 4A-D Power LED flashing
    By MarcusViberg in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 09-08-2014, 10:11 AM
  4. Lutron DMX module: colour controlled lights
    By Darren in forum Design Assistance - Controls
    Replies: 0
    Last Post: 07-21-2014, 06:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •