Results 1 to 2 of 2

Thread: LQSE 4A-D Power LED flashing

  1. #1

    LQSE 4A-D Power LED flashing


    I have a probem with LQSE-4A-D. The Power lamp on the unit keep flashing continous? Cant find any answer on Lutron website. Not possible to manually overide the dimmer

    Best regards

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    For the issue with Power LED Blinking:

    Problem - LQSE-4A is having issues communicating with the dimming board that controls the outputs.
    Cause - Currently being investigated.
    Possible Solutions - Try a power cycle and transfer. If this does not resolve the issue, we would recommend connecting it by itself only on the QS link then going to "Tools->Update DPM Firmware". Perform a firmware upgrade to the unit and a transfer afterward. If the unit is still not controlling the loads, the unit is bad and would need to be replaced.


Similar Threads

  1. RF Receiver Rapid Red Flashing
    By Anna W. in forum Troubleshooting - Shades
    Replies: 6
    Last Post: 11-21-2014, 10:05 AM
  2. Red/Green Flashing
    By hemmingsen in forum Troubleshooting - Shades
    Replies: 1
    Last Post: 08-25-2014, 09:56 AM
  3. LQSE-4A-D Error
    By stevi in forum Troubleshooting - HWQS
    Replies: 8
    Last Post: 06-17-2014, 11:47 AM
  4. Lqse-4a-d
    By Petar in forum General Discussion - HWQS
    Replies: 4
    Last Post: 06-02-2014, 02:21 PM
  5. RPM-4A Unit LED rapidly flashing?
    By Blair S. in forum Troubleshooting - HWQS
    Replies: 2
    Last Post: 10-08-2013, 05:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts