Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Pentair Intellibrite Pool Light & Lutron Homeworks QS

  1. #1
    Junior Member
    Join Date
    Dec 2013
    Posts
    9

    Pentair Intellibrite Pool Light & Lutron Homeworks QS

    Hi,

    Has anyone done pool light control with Pentair Intellibrite Pool Light.

    How can Lutron Homeworks QS control them?

    Thank you.

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    HomeWorks QS can integrate with third party controllers using Ethernet or RS232. Please see scenarios 2 and 4 of the attached app note on how to control third party devices with Ethernet or RS232. After adding and configuring the third party controller in your equipment tab, you would need to edit the command sets to type in the third party commands the pentair controller would accept. Then you can use button presses to send these integration commands.
    Attached Files Attached Files

  3. #3
    Quote Originally Posted by Armando B. View Post
    HomeWorks QS can integrate with third party controllers using Ethernet or RS232. Please see scenarios 2 and 4 of the attached app note on how to control third party devices with Ethernet or RS232. After adding and configuring the third party controller in your equipment tab, you would need to edit the command sets to type in the third party commands the pentair controller would accept. Then you can use button presses to send these integration commands.
    I believe he may be asking about connecting the lights directly to a switch or relay module. The way colors are selected is by cycling off and on the power rapidly a given number of times.

  4. #4
    Senior Member
    Join Date
    May 2014
    Posts
    170
    You could do it either way RS232 through an iLink to Pentair controller or directly control the lights and rapid toggle the lights as mentioned. Pentair and iLink suck so I would control directly.
    VAV
    Danbury, CT

Similar Threads

  1. Best LED Pot Light Retrofits for dimming
    By gwaites in forum General Discussion - RA2
    Replies: 6
    Last Post: 03-11-2020, 10:02 AM
  2. Default brightness for RRD-6CL-WH light switches
    By geofry in forum General Discussion - RA2
    Replies: 2
    Last Post: 06-03-2014, 02:12 AM
  3. Mastro fan and light control will not hold full brightness
    By cleaner in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 03-18-2014, 05:50 PM
  4. Maestro fan/light control
    By Mike S. in forum General Discussion - Controls
    Replies: 1
    Last Post: 06-19-2013, 01:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •