Results 1 to 7 of 7

Thread: Roomie control of Homeworks

  1. #1
    Junior Member
    Join Date
    Feb 2014
    Posts
    12

    Roomie control of Homeworks

    I am trying to control keypads directly from the Roomie App on an iPad. The home+ app works beautifully, I just need to add a few basic commands. Lights on/off, shades etc. I don't need dimming control. Is this the proper syntax to emulate pressing of button 1 on a keypad 29 connected to link 6 on processor 1?

    kbp, [1:6:29], 1

  2. #2
    Looks ok, just needs to be terminatted with a carriage return, hex 0D or decimal 13.
    VAV
    Danbury, CT

  3. #3
    Junior Member
    Join Date
    Feb 2014
    Posts
    12
    Thank you. I also need the username and password for the authentication; I can see the password when I upload the project to the processor but what is the username?

  4. #4
    You can set up your own user pass in the illumination, interactive or qs software, check the help files.
    VAV
    Danbury, CT

  5. #5
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    We would recommend sending the login information to the Illumination system all in one string in the user name and leaving the password field blank. For example, the default login for the Illumination system "LutronGUI,jetski". In link 9 of the software you can configure your own user name and password combinations as Vining stated above.

  6. #6
    Junior Member
    Join Date
    Feb 2014
    Posts
    12
    Thank you. Is the default login "LutronGUI" changeable or no? I already setup my own password and user name for the home+; should I send that or the default(LutronGUI,jetski)?

  7. #7
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    If you have set up your own login, you can use it with the format "username,password". LutronGUI is the default and it does not need to be changed as you can always use the login information you create.

Similar Threads

  1. Using HomeWorks QS to Control a HomeWorks Illumination System
    By Armando B. in forum 3rd-party Integration - HWQS
    Replies: 9
    Last Post: 01-23-2015, 04:31 PM
  2. Replies: 2
    Last Post: 12-11-2013, 04:29 PM
  3. Upgrading HomeWorks Interactive to HomeWorks Illuminations
    By Armando B. in forum Design Assistance - Legacy HW
    Replies: 0
    Last Post: 10-17-2013, 05:47 PM
  4. Control HomeWorks system via Netstreams DigiLinx, need help please!
    By uasya in forum 3rd-party Integration - Legacy HW
    Replies: 6
    Last Post: 10-17-2013, 06:22 AM
  5. HomeWorks panels and LED bulb control
    By Ty W. in forum Compatibility - LED
    Replies: 1
    Last Post: 07-24-2013, 12:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •