Editing Shared Scenes

[John_Nau]

I just started converted a RadioRA 2 program from scenes to shared scenes. I was having some problems checking the contents of existing shared scenes. If I open one up to see what it contains it then is put into the program. Is there a way to be able to review shared scenes from a list as is done in HWQS?

Thank you

[Armando B.]

Thank you for this feedback, at this point there is not way to see the shared scenes in RadioRa2 in a list. Whenever you select a saved shared scene, it will program the scene to the system for that button or input selected.

[John_Nau]

Thank you for this feedback, at this point there is not way to see the shared scenes in RadioRa2 in a list. Whenever you select a saved shared scene, it will program the scene to the system for that button or input selected.

I would think that this would be an excellent enhancment.

[Imshea]

The following is a workaround. Create a Phantom Keypad, assign the Shared scene to a button and you can then review it.

[John_Nau]

The following is a workaround. Create a Phantom Keypad, assign the Shared scene to a button and you can then review it.

when you program them there would be extra steps and a chance of making more errors.

[SDR-Mike]

Run a Keypad Programming report. Shared scenes and toggles will be on there.

[John_Nau]

Run a Keypad Programming report. Shared scenes and toggles will be on there.

that report does contain the shared scenes but does not give the shared scene names.