Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: meeting room automation with QS GrafikEye

  1. #1
    Junior Member
    Join Date
    Aug 2014
    Posts
    11

    meeting room automation with QS GrafikEye

    Except dim down lighting, close shade, pull down projector screen with I/O interface for " presentation" scene, can i integrate to switch ON projector together too? If so, what is the interface device?

    With only QS GrafikEye and NWK, can GrafikEye send customize protocol to AV system when press scene button?

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    Unfortunately, the Grafik Eye QS and NWK can only receive custom strings, not send. The only integration that can be done is CCO outputs. However, if the third party AV system can see the feedback (i.e. ~DEVICE...) of the QSG and NWK on the network and act on that feedback, then it could be done that way.

  3. #3
    Junior Member
    Join Date
    Aug 2014
    Posts
    11
    Quote Originally Posted by Armando B. View Post
    Unfortunately, the Grafik Eye QS and NWK can only receive custom strings, not send. The only integration that can be done is CCO outputs. However, if the third party AV system can see the feedback (i.e. ~DEVICE...) of the QSG and NWK on the network and act on that feedback, then it could be done that way.
    thanks for your info.

    Is possible AV system can read Pico signal? Let's say make use of Pico to send signal--> QSM --> AV system processor.

    Any idea to switch ON projector using QSG with integration?

  4. #4
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    Unfortunately, the AV system would not be able to directly read the PICO signal. If the projector can accept a contact closure, then you could use the QSE-IO to send a contact closure output when a button is pressed to power the projector on or off.

Similar Threads

  1. Apple Home Kit - Potential Answer to Home Automation Integration
    By schalliol in forum 3rd-party Integration - RA2
    Replies: 46
    Last Post: 11-15-2015, 01:02 AM
  2. Hide room in the Lutron App
    By krassyg in forum Programming - RA2
    Replies: 5
    Last Post: 04-28-2014, 01:40 PM
  3. Juno LED diodes burning up and failing...only in one room?? PLEASE HELP!!
    By JeffCohenYusen in forum Performance Issues - LED
    Replies: 1
    Last Post: 03-11-2014, 11:27 AM
  4. L shaped room
    By waterloo.bob in forum General Discussion - Controls
    Replies: 1
    Last Post: 01-13-2014, 03:39 PM
  5. Automation of keypad backlighting
    By LightBrigade in forum Programming - HWQS
    Replies: 2
    Last Post: 11-02-2013, 02:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •