-
Selection - LED Driver with Grafik Eye QS
I would like of to choose LED Driver, I use the Grafik Eye with LED load:
My system:
Grafik Eye QS
LEDs Characteristic:
Input AC 85-265 V, 50/60 Hz
Output: DC 12 V
Voltage: 240 V in my system
So, I used the LED Driver Selection Tool and I found, Hi-lume A-Series LED Driver model, the LED Driver LDEA2E1CPA-AV120, but I not sure if this equipment will work well in my system.
Please, give me one tip for choose the correct LED driver!
Francisco Bezerra
rEBUSCAR Disign
Tels: +55(85)9159.6308 - +55(85)34977442
E-mail:
francisco_bsousa@icloud.com
CNPJ: 18.672.649/0001-14
-
Franciscobsousa,
The LDEA2E1CPA-AV120 will work just fine for your system if the Grafik Eye QS being used is the Ecosystem version, as the LDE drivers can only be dimmed through an Ecosystem link. You are correct though, this would be the only option that Lutron offers for 240V and CE rated.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Steve S.
If I have another model of Grafik Eye, for exemple, QSGRJ-6P-1TWH, what kind of LED driver I can use to LED load, considering the characteristic above of my load LED or Lutron doesn't have one model for this kind of Grafik Eye.
Thank you, for last answer, helped me too much.
-
I can use the Grafik Eye QSGRJ-6P-1TWH with LTEA4U1UKN-AV120 and one Voltage transformer of the 220 VAC to 120VAC for dimming the LED Load:
LEDs Characteristic:
Input AC 85-265 V, 50/60 Hz
Output: DC 12 V
Voltage: 240 V in my system
Francisco Bezerra
rEBUSCAR Disign
Tels: +55(85)9159.6308 - +55(85)34977442
E-mail:
francisco_bsousa@icloud.com
CNPJ: 18.672.649/0001-14