Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Anyway to make an LRF sensor talk to BOTH RA2 and Maestro Wireless?

  1. #1
    Junior Member
    Join Date
    Oct 2013
    Posts
    29

    Anyway to make an LRF sensor talk to BOTH RA2 and Maestro Wireless?

    This came up and was wondering if possible. The sensor is the same part number, but once activated to a RA2 system OR associated with an MW, can it also be connect to the other? I would never recommend co-locating the product lines, but I'm dealing with an "interesting" designer on this one!

  2. #2
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    403
    When adding a RadioRA2 system into a residence that already has another RF system installed the RadioRA2 system could potentially change its frequency due to the existing system. The sensor can only communicate on 1 frequency so it would either communicate to the existing system or the RadioRA2 system.

  3. #3
    Junior Member
    Join Date
    Oct 2013
    Posts
    29
    Well, they're technically both ClearConnect operating at the same general frequency, but the encryption is the assumed issue. Like I implied - it's a bad idea to begin with, but I had to ask!

Similar Threads

  1. Maestro Wireless website link.
    By Brian W. in forum General Discussion - Controls
    Replies: 0
    Last Post: 06-02-2014, 03:17 PM
  2. Sivoia QS Wireless Power Options?
    By waveform in forum Design Assistance - Shades
    Replies: 2
    Last Post: 10-15-2013, 12:48 PM
  3. Sivoia QS Wireless Control
    By waveform in forum Design Assistance - Shades
    Replies: 1
    Last Post: 10-15-2013, 10:05 AM
  4. Maestro Wireless
    By Blair S. in forum Design Assistance - Controls
    Replies: 6
    Last Post: 10-08-2013, 06:04 PM
  5. Sivoia QS Wireless Blink Codes
    By Blair S. in forum Troubleshooting - Shades
    Replies: 0
    Last Post: 07-18-2013, 07:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •