Results 1 to 2 of 2

Thread: My 5 button Hybrid Keypads (RRD-W5BRL) will not activate

  1. #1
    Junior Member
    Join Date
    Jun 2014
    Posts
    2

    My 5 button Hybrid Keypads (RRD-W5BRL) will not activate

    Hello,
    This could be a real newbie question so please be kind. :)
    I have two RRD-W5BRL hybrid keypads that are not getting recognized during activation.
    My Dimmers are having no problem. However, Dimmers that control the same set of LED lights are stating that they are already activated if one of the others (on the same set of lights) is activated. (this is another issue for <quite possibly another thread>

    Is there some sort of reset on the keypads beyond the following:
    "push a button three times and hold on third push till it flashes then push that button three times again"

    I have tried the above reset with no luck on the activation problem.

    Any advice would be appreciated.

  2. #2
    Junior Member
    Join Date
    Jun 2014
    Posts
    2
    Ok, Never mind. I was able to reset the keypads and they are now communicating with the software. Thanks for the responses. lol

Similar Threads

  1. What is the difference hybrid and wall-mount keypad
    By Anna W. in forum Design Assistance - RA2
    Replies: 8
    Last Post: 04-28-2014, 07:56 AM
  2. Wiring Hybrid Repeaters
    By Armando B. in forum Design Assistance - HWQS
    Replies: 0
    Last Post: 04-18-2014, 04:46 PM
  3. Keypads missing in IOS app
    By SB Smarthomes in forum General Discussion - RA2
    Replies: 4
    Last Post: 02-22-2014, 05:04 PM
  4. Virtual Keypads as indicators only
    By LightBrigade in forum Programming - HWQS
    Replies: 4
    Last Post: 11-07-2013, 02:29 PM
  5. Hybrid Keypad
    By Anna W. in forum Programming - RA2
    Replies: 1
    Last Post: 05-07-2013, 02:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •