Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Default brightness for RRD-6CL-WH light switches

  1. #1

    Default brightness for RRD-6CL-WH light switches

    Hi folks,

    Prior to programming the RadioRA2 system, when the individual RRD-6CL-WH light switches were installed, hitting the on/off button would take the ON brightness to the previously used setting. Since connecting the RadioRA2 system, while I can dim the lights after turning them on, the initial on always takes them to 2nd-from-the-top brightness. Is there any way to change this? I don't see any options in the RadioRA2 software or the iOS Home Control+ app.

    Thanks!

  2. #2
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    403
    By default when using the RadioRA2 software the dimmers have a set on level of 75%. This can be changed by going into the design screen of the software and right clicking on the dimmer. This will allow you to select the option for the advanced settings. In the advanced settings of the dimmer you can set the on level to a level you want or you can set it to "last level". This is also an option to apply that setting to all the dimmers in the project. You will then need to transfer the file to the system.

  3. #3
    Quote Originally Posted by Craig W. View Post
    By default when using the RadioRA2 software the dimmers have a set on level of 75%. This can be changed by going into the design screen of the software and right clicking on the dimmer. This will allow you to select the option for the advanced settings. In the advanced settings of the dimmer you can set the on level to a level you want or you can set it to "last level". This is also an option to apply that setting to all the dimmers in the project. You will then need to transfer the file to the system.
    That's great, I found the option, thanks!

Similar Threads

  1. Placement of hidden switches
    By Ilans1 in forum Design Assistance - RA2
    Replies: 16
    Last Post: 03-02-2018, 12:56 AM
  2. In-wall light dimmer (PD-6WCL) - only 80% maximum brightness?
    By nester in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 07-31-2017, 07:26 PM
  3. Mastro fan and light control will not hold full brightness
    By cleaner in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 03-18-2014, 05:50 PM
  4. Maestro fan/light control
    By Mike S. in forum General Discussion - Controls
    Replies: 1
    Last Post: 06-19-2013, 01:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •