Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: SVQ-EDUH1-10 - How do I control these?

  1. #1

    SVQ-EDUH1-10 - How do I control these?

    I received a bunch of these roller motors from another installer who said they were part of some demo shades & they were controlled via Homeworks - model # SVQ-EDUH1-10.

    However, I can not find anything online about them nor how to control them.

    They have the clear tube out the end like the newer RA2 RF Shade dongles. I was told they can integrate with Homeworks but there are only three connectors on the cable. Not the standard 7 wires.

    I assume they are a standalone type of motor but that is all I know.

    Any help would be very much appreciated especially the controls needed to raise/lower them.

    Thank you for your help!

    Sincerely,
    Teresa

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    That model number shade edu was developed as a RF solution of Homeworks Illumination and is no longer a current offering. A Homeworks Illumination processor, one RF repeater, (if not an RF processor) and a keypad is needed to control it. The three connectors are there to provide power only, the communication is RF of course.

  3. #3
    Senior Member
    Join Date
    May 2013
    Posts
    420
    I just want to clarify that all Sivoia QED product line is still a current offering. The current part number for the above mentioned is SVQ-EDUH1S-10.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •