SVQ-EDUH1-10 - How do I control these?

[RA2-Designer-Gal]

I received a bunch of these roller motors from another installer who said they were part of some demo shades & they were controlled via Homeworks - model # SVQ-EDUH1-10.

However, I can not find anything online about them nor how to control them.

They have the clear tube out the end like the newer RA2 RF Shade dongles. I was told they can integrate with Homeworks but there are only three connectors on the cable. Not the standard 7 wires.

I assume they are a standalone type of motor but that is all I know.

Any help would be very much appreciated especially the controls needed to raise/lower them.

Thank you for your help!

Sincerely,
Teresa

[Blair S.]

That model number shade edu was developed as a RF solution of Homeworks Illumination and is no longer a current offering. A Homeworks Illumination processor, one RF repeater, (if not an RF processor) and a keypad is needed to control it. The three connectors are there to provide power only, the communication is RF of course.

[Blair S.]

I just want to clarify that all Sivoia QED product line is still a current offering. The current part number for the above mentioned is SVQ-EDUH1S-10.