Could anybody tell me if it is possible to track LED status of normal and phantom keypads in Control4? I have two senarios:
- Client setup external lighting scene, but want to include pool lights that are connected to pool controller and controlled from C4. I want to switch the pool lights on when the Lutron phantom keypad's LED is on and off when the LED is off.
- Ground floor scene to show on/off when the Lutron keypad's LED is on or off
I do this easily in Crestron, but in C4 I can only see if the button is pressed, released or hold. I do not get feedback from the keypad button's LEDs, under advance programming in Composer 2.5.3
Am I missing something?