Results 1 to 2 of 2

Thread: Myhome Bticino commanding sivoia QS Shades

  1. #1
    Junior Member
    Join Date
    Jan 2014
    Posts
    1

    Myhome Bticino commanding sivoia QS Shades

    I was called in today from a almost ready house with a myhome bticino system installed in it

    They want me to quote shades and I wonder if any one has any experience with open web net a legrand protocol for bticino to control 3 party systems either through ip or rs232. Any other idea on how to accomplish it?

  2. #2
    Authorized Lutron Contributor
    Join Date
    Jun 2013
    Posts
    91
    Our QS wired shades can be controlled via an RS232 or ethernet string command. The commands would be sent via the QSE-CI-NWK-E interface.

    Group shade commands can be performed by creating phantom buttons within the NWK interface using the Phantom button programming guide. Attached is the Phantom button programming guide.
    Attached Files Attached Files

  3. Likes Armando B. liked this post

Similar Threads

  1. Integrating Sivoia QS wired/wireless shades with HW Illumination
    By Blair S. in forum 3rd-party Integration - Legacy HW
    Replies: 0
    Last Post: 07-29-2013, 07:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •