Results 1 to 6 of 6

Thread: Integration with door locks.

  1. #1

    Integration with door locks.

    Has someone done integration with door locks, if so what manufacture and how did you integrate with RR2.

  2. #2
    Junior Member
    Join Date
    Apr 2014
    Posts
    21
    I think you'd need a gateway type device.

    I could do this with my Vera controller.

    It would take a signal from my Z-Wave locks (Kwikset or Schlage) and for example when the lock is unlocked with a certain code it would fire off a scene that either presses a button on the Lutron keypad (if I want RA2 to control the scene) or simply controls the RA2 devices directly (sending signals to dim at a certain level to some lights; signals to others to stay on for 5 minutes then turn off etc).

    But I have mine integrated with my alarm instead of my locks.

  3. #3
    Quote Originally Posted by r2@electrasalesltd.ca View Post
    Has someone done integration with door locks, if so what manufacture and how did you integrate with RR2.
    Maglocks ? Gate strike ? What type ?
    I am not as dumb as you look..

  4. #4
    I am looking to do the same thing?? ANy thoughts guys / gals? What "gateway" would you recommend?? I need this for both RA2 and Homeworks.

    Thanks

  5. #5
    Senior Member
    Join Date
    Jun 2013
    Posts
    666
    Quote Originally Posted by Scottydont View Post
    Maglocks ? Gate strike ? What type ?
    I had a very good customer that used the RRD8ANS to control power to mag locks. The mag lock controls were separate, but he was able to then disable the mag locks for religious holidays. The VCRX would also be an option if the mag locks are using some type of CCI to signal a release.
    Residential Lighting and Shading Specialist for CED Escondido

    mbalay@cedescondido.com

  6. #6
    I am looking for something that would allow my RA2 or HOMEWORKS to be able to communicate with residential keyless locks (z-wave... zigbee). Any

Similar Threads

  1. Garage Door Lear Car2u and RR-VCRX
    By jfbordenjr in forum Design Assistance - RA2
    Replies: 2
    Last Post: 07-01-2014, 09:41 AM
  2. Monitoring the status of a garage door
    By Craig W. in forum Programming - HWQS
    Replies: 10
    Last Post: 05-27-2014, 12:11 PM
  3. Garage Door Control
    By Vic F. in forum Design Assistance - RA2
    Replies: 7
    Last Post: 11-06-2013, 02:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •