Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: Programming of CCP Panel

  1. #1
    Junior Member
    Join Date
    Apr 2014
    Posts
    6

    Programming of CCP Panel

    We have a project already order the CCP Panel with XP Module 4S and TVM to control 0-10V LED, which device I can use in HomeWorks Lutron Designer? I can't find the 4S and try to add a 4R but can't to assign 0-10V zone to 4R, is it any programming guilde in the resourse website for program CCP Panel?
    Thanks.

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    You will find the answer in the following thread. You can use the 4U in the software with the TVM.

    https://forums.lutron.com/showthread...ighlight=panel

  3. #3
    Junior Member
    Join Date
    Apr 2014
    Posts
    6
    Thanks for your reply, Armando.
    I have one more question, this is my first time to use HomeWorks QS to do the programming of CCP Panel, is the link assignment need to change to HWQS Power Panel and no need to activate the module? is it any link I can get more information about programe Panel?
    Thanks.

  4. #4
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    Correct, the link in the software needs to be configured as a power panel link and the SPI or MI does not need to be activated. The SPI or MI do need to be configured to the correct address according to the software (1-16) and the modules need to have the correct address according to the panel placement in the software as well. This can be done via the rotary dials. See attached for processor links information and spec grade panel information.

  5. #5
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    Would you please be able to provide the part number of the CCP panel?

Similar Threads

  1. Can I Mount the H48 Board on a Third Party Panel?
    By Armando B. in forum Design Assistance - HWQS
    Replies: 0
    Last Post: 03-03-2014, 03:44 PM
  2. Execute Double Tap Programming without the Press programming
    By Armando B. in forum Programming - Legacy HW
    Replies: 0
    Last Post: 11-12-2013, 11:52 AM
  3. Convert Sivoia QS Wireless from Battery to CSPS-P1-10-6 Power Panel
    By jfbordenjr in forum General Discussion - Shades
    Replies: 4
    Last Post: 11-07-2013, 05:36 PM
  4. QSPS-P1-10-60 (Power Panel) Button Functions and Diagnostics
    By Blair S. in forum Troubleshooting - Shades
    Replies: 0
    Last Post: 07-29-2013, 01:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •