Thanks Thanks:  1
Likes Likes:  2
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Pico & RA2 control of the same shade

  1. #1

    Pico & RA2 control of the same shade

    We have a job with Roller 64 drives and wireless dongles for integration into RA2. My experience with Picos is limited, can a shade be programmed to respond to both RA2 & Pico control? One room is an office with RA2 wall keypad, but no tabletop keypads and client would like to have shade control from the desk. Pico seems like a good fit if this can be done and still retain RA2 integration.

  2. #2
    Authorized Lutron Contributor
    Join Date
    Aug 2013
    Yes, this is possible. You'll need to add both the RA 2 wall keypad and Pico control into the RA 2 software, along with the shade(s), and program both devices to control the same shades.

  3. Thanks darkbluekeys thanked for this post
    Likes Armando B., darkbluekeys liked this post

Similar Threads

  1. Control Shade Groups and Shades via Integration
    By Armando B. in forum 3rd-party Integration - HWQS
    Replies: 0
    Last Post: 02-27-2014, 10:26 AM
  2. Pico w/ Shades
    By paulhanks in forum Programming - RA2
    Replies: 3
    Last Post: 01-03-2014, 01:15 PM
  3. Pico and Occ Sensors out of programming
    By mandbelectric in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 12-31-2013, 04:11 PM
  4. Pico Remote w/ Nightlight?
    By az1324 in forum General Discussion - Controls
    Replies: 1
    Last Post: 11-08-2013, 10:30 PM
  5. Old Pico
    By Ty W. in forum Programming - HWQS
    Replies: 1
    Last Post: 06-18-2013, 03:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts