I am having the same problem. I am setting up a DIY security system like Abode but I need it to activate the security mode on my radiora2 system. Can I accomplish this with IFTTT and a Raspberry Pi to send the signal to the main repeater via telnet?
I am having the same problem. I am setting up a DIY security system like Abode but I need it to activate the security mode on my radiora2 system. Can I accomplish this with IFTTT and a Raspberry Pi to send the signal to the main repeater via telnet?
Hello,
You can telnet to the Caseta Pro Bridge, model number L-BDGPRO2-WH. The original however, will not allow for a telnet connection.
You can extract the Integration report by doing the following.
Tap the settings gear
Go to Advanced
Go to Integration
Make sure Telnet support is checked
Click Send integration Report
From there you can download the integration report and use it as needed.