Establishing a Telnet Connection to the Main Repeater

[whirredup]

I am having the same problem. I am setting up a DIY security system like Abode but I need it to activate the security mode on my radiora2 system. Can I accomplish this with IFTTT and a Raspberry Pi to send the signal to the main repeater via telnet?

[Rowly]

Is there a document for the commands possible on the new RA2 Select Main Repeater? Various things mentioned here don't function (e.g "??"). Many of the command set is the same as previous Lutron products but there's definitely some quirks!

For a list of telnet commands you can establish a telnet connection to the main repeater and send the command "??".

[DominikHoffmann]

� On the command line, type "telnet xxx.xxx.xxx.xxx" where the 'x's represent the IP address the main repeater is using to connect to your machine (see it in the "find main repeater" screen).
- If you do not have telnet enabled in your machine, please enable it by going to the Control Panel and then to Programs and Features. It is a feature called "Telnet Client".

Is this still up-to-date? I cannot telnet into my Caséta Smart Hub at its IP address.

[Rowdy R.]

Hello,
You can telnet to the Caseta Pro Bridge, model number L-BDGPRO2-WH. The original however, will not allow for a telnet connection.
You can extract the Integration report by doing the following.

Tap the settings gear
Go to Advanced
Go to Integration
Make sure Telnet support is checked
Click Send integration Report
From there you can download the integration report and use it as needed.