Programming GrafiK Eye QS that connected to Homework QS

[stevi]

in homework illumination if we have a homework system that connected to grafik eye we can program a button as scene 1, scene 2 or scene off as like scene 1, scene 2, and scene off on the grafik eye. But in Homework QS when i try to program like that there's no option as like in homework illumination to use scene 1, scene 2, or scene off on a button in HWQS Software.

so, how to do it ?

[Armando B.]

At this time, the HomeWorks QS system can only control the zones in the Grafik Eye QS, not call the Grafik Eye QS scenes. Thank you for this feedback on this.

[stevi]

if i already programmed a system which is connected with the Grafik Eye QS, how to restore the function of the Grafik Eye to be able to call scene again ?
because i'm already programmed a system which is connected with the Grafik Eye QS and now the Grafik Eye QS can not call the scene that i set in the Grafik Eye QS eventhough if i disconnected the Grafik Eye QS from the System.

[Armando B.]

stevi,

The only way would be to send the Grafik Eye QS to factory default settings. Please be aware, if it is a wired Grafik Eye QS, after a few moments, the processor will automatically send a transfer to it (this happens for all QS devices). In order to prevent this from happening, we recommend disconnecting pins 3 and 4 on the QS link for the Grafik Eye.

[stevi]

The only way would be to send the Grafik Eye QS to factory default settings.

Armando,

How to send the Grafik Eye QS to factory default settings ?

[stevi]

Armando,

Please tell me how to do it.
i really need to know how to restore the Grafik Eye QS to factory default settings.

Thanks.

[mcignarella]

i think you can find it here

http://resi.lutron.com/Portals/4/Pro...%20Default.pdf

[stevi]

Thank you mcignarella. It really helped me.