Got a couple of PD6-ANS switches that I wanted to wire up to the house for security purposes (set a schedule for when we're off on vacation). Prior to getting the 2 PD6-ANS switches, I bought a PD6-WCL dimmer (no neutral) and that worked with my hallway with all LEDs (4 chandelier-type bulbs and a flood). When I wanted to move the dimmer to a different location, I got the PD6-ANS switches. No luck with getting them to work. When they're wired up in the location that previously had the dimmer, the green indicator lights up but the LEDs either don't go on (or maybe flash on and then off - can't tell since I have to go to the basement to turn on/off the breaker) or they just repeatedly turn on and off. After having read some of the forum messages, I'm beginning to think that our early 80s house has bad and/or noisy neutral wiring. Is there anything I can do short of returning these and getting the Caseta switches that don't need neutral. Oh, forgot to mention that I wired up a LUT-MLC (on the off chance that it might help) and still no go.