Thanks Thanks:  1
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: QS 12.2 - LQSE-4S1-D missing

  1. #1

    QS 12.2 - LQSE-4S1-D missing

    Attempting to add the LQSE-4S1-D to a project using QS 12.2 but it does not show as an option. Please advise ASAP as this job is currently being deployed.

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello totesthouse,
    Thank you for your post.
    I am not finding it in the software either. I'll see if I can find out and reply back once I know.

  3. #3
    Authorized Lutron Contributor
    Join Date
    Aug 2013
    Posts
    14
    When the LQSE-4S1-D was obsoleted in the US itwas removed from the software. The only way to add one in to a newer projectfile would be to add it in an older project file and then upgrade that file to12.2. We mocked this up and tested the conversion using Homeworks software 9.2and they were there. We then tested converting it to 12.2 and that worked.

    Another option, if the modules hadn't beenpurchased yet you could use the LQSE-4S8-120-D instead. These are in the newerversions of software since they replaced the 4S1 modules. The only drawbackwith this is that the 4S8 is only rated for 120v where the 4S1 was rated for120v or 277v. The 4S8 is rated for 8 amps of switching instead of the 1 amprating for the 4S1.

  4. Thanks Blair S. thanked for this post
  5. #4
    I was able to send my file to Lutron and have the engineering team successfully add the LQSE-4S1-D

Similar Threads

  1. LQSE-4S5-230-D missing in the software?
    By Kingfisher in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 01-29-2018, 11:18 AM
  2. Missing a device
    By Squill in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 11-15-2017, 09:32 PM
  3. Triathlon WIDR missing in my SCT
    By BTCSD in forum Troubleshooting - Shades
    Replies: 1
    Last Post: 08-22-2016, 11:23 AM
  4. Missing RRD/RKD button configurations
    By joshg in forum General Discussion - RA2
    Replies: 3
    Last Post: 02-22-2016, 11:29 AM
  5. Keypads missing in IOS app
    By SB Smarthomes in forum General Discussion - RA2
    Replies: 4
    Last Post: 02-22-2014, 05:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •