Hi everyone,
I just purchased a two pack of Caseta dimmers and two sets of dimmable LEDs to replace my current halogens -- six of these for under the kitchen cabinets and three of these for ceiling track lighting.
I plugged in the cabinet lighting, installed the switch, and gave it a try; the lights got bright quickly, then dimmed considerably and started to flicker. I tried adjusting the low end and top end of the dimming to no avail, and I can't figure out what the issue might be! The only thing that seemed to help was unplugging one of the LEDs and replacing it with a halogen bulb. After doing this, the turn on and turn off dimming is now smooth and flicker free, and the LEDs are bright.
More or less the same holds true for the ceiling track lighting; I turn the dimmer on and the three LEDs just flicker on and off without much rhyme or reason.
Help!
And thanks in advance