Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: Cannot activate auxiliary repeaters

  1. #1
    Junior Member
    Join Date
    Feb 2018
    Posts
    4

    Cannot activate auxiliary repeaters

    Having difficulty activating auxiliary repeaters
    Main repeater is online
    Added auxiliary repeaters to design but no luck activating them despite being next to main repeater
    Tried to add them by serial number but again no luck
    Tried factory resetting them and then activating them but again no luck
    What am I doing wrong?

  2. #2
    Junior Member
    Join Date
    Feb 2018
    Posts
    4
    46 view and no replies?
    Ridiculous
    Anyway solved my own problem by trial and error and am posting to make this forum more useful
    Aux repeaters were not properly reset to factory default
    As the instructions state, you have to be very fast in the tapping department

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    I've been on a project for a couple of days. I'm always happy to help.

    The other thing I would mention is try to keep the repeaters a couple of feet away when activating. Sometimes it makes a difference. Sometimes not.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  4. #4
    Junior Member
    Join Date
    Oct 2019
    Posts
    2
    OMG Thank you thank you thank you for this post. Finally the Aux has activated

  5. #5
    Junior Member
    Join Date
    Jan 2020
    Posts
    1
    The other thing I would mention is try to keep the repeaters a couple of feet away when activating. Sometimes it makes a difference. Sometimes not.

  6. #6
    Lutron Technical Support
    Join Date
    May 2013
    Posts
    635
    Another tip is that router WiFi extenders can sometimes overpower or drown out the RF signal of the repeaters. Keep the aux repeaters a few feet away. Alternately, if possible temporarily turn off any nearby WiFi extenders.

Similar Threads

  1. RF Repeaters Wired To A Processor
    By jkvossen in forum Design Assistance - HWQS
    Replies: 2
    Last Post: 02-07-2017, 08:01 PM
  2. 6 Button keypad 80% "broken" after de-activate and re-activate?
    By Ramias in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 11-29-2016, 04:56 PM
  3. Question Concerning RF Repeaters and P5 Systems
    By jkvossen in forum Troubleshooting - Legacy HW
    Replies: 3
    Last Post: 10-04-2016, 04:56 AM
  4. Cable to Wire Repeaters
    By Armando B. in forum Design Assistance - RA2
    Replies: 8
    Last Post: 02-11-2015, 12:46 PM
  5. Wiring Hybrid Repeaters
    By Armando B. in forum Design Assistance - HWQS
    Replies: 0
    Last Post: 04-18-2014, 04:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •