Quote Originally Posted by jasonjsipos View Post
I have this same issue with the waterfall effect after a power outage. It has happened before but always reset with a reboot of the system, (by turning the power off and back on) but this time it has not reset. It has been this way for a week and I am struggling to figure out what could be wrong. Finally came across this forum and thread and thought I would ask the experts. Any thoughts on what could be wrong that this will not reset? The switches in question get their power directly from the main control unit. Any help would be greatly appreciated!
In the past, this has been restored by the system's devices powering up before the processor. We would advise using a UPS on the processor's power supply, ensuring that it stays powered through the outage and the devices do not fail to connect to the processor while it is still rebooting. We hope this helps!