Guys
I have been installing RA 2 since the beginning.
I decided to install Select in my new house and installed about 17 dimmers today using the new RRD-6ND dimmers as all the lights are LED and this seems to be their new goto dimmer.
In the Select APP there are options in advanced for setting Trim to keep LEDs from flickering etc but no sign of Fade times etc.
I figured okay its a Maestro so I tried the Air Gap Setup for changing the dimmer settings and it won't let you do it because the dimmer is already controlled from an app which pretty much locks it down to app programming.
I called Lutron tonight and the tech had no idea and said well maybe you cant change fade times on this system.
I find this very hard to believe and without the ability to change fade times this system is useless.
I also noticed when a dimmer is set to 1 LED or the lowest setting. When you turn on the right you dont get a light for 1-2 seconds making it walking it the room dangerous. If you double tap then yes it lights fast but why when at its lowest dim setting it fades so slow you dont get light fast enough. This is why I am looking to change fade times.
I hope Thursday they have an answer for this or I can tell you Select would be a disaster for most not being able to dial in fade in and our times. Especially with LED's now and setting trim levels you must have fades.
Thx
Craig