Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Grafik Eye + QSE IO

  1. #1
    Junior Member
    Join Date
    Apr 2014
    Posts
    12

    Grafik Eye + QSE IO

    Hello everybody.
    I have one question about motorized projection screen.
    Namely,
    I have projection screen in one office and it is third-party equipment. The request for this screen is to be controlled by Grafik Eye. I found that I need to use QSE IO device as interface to projection screen motor. Is it correct?
    Can somebody clarify to me how to make connection of projection screen and QSE IO device? The power supply for projection screen is 230V.

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    You would need to use a Grafik Eye QS and the projector would need to accept dry contact closures. You can then connect the QSE-IO to the Grafik Eye QS and have the Grafik Eye press buttons to control the contact closure outputs on the QSE-IO.

    Please see the attached documentation on how to program the CCO outputs from the Grafik Eye QS and the tecnical sheet with the QSE-IO wiring diagrams
    Attached Files Attached Files

  3. #3
    Junior Member
    Join Date
    Apr 2014
    Posts
    12
    Ok. Thanks a lot Armando.

  4. Likes Armando B. liked this post

Similar Threads

  1. Grafik Eye QS IR Control
    By domino in forum 3rd-party Integration - Controls
    Replies: 5
    Last Post: 10-10-2018, 01:23 PM
  2. Grafik Eye Integration
    By harricane in forum Design Assistance - Legacy HW
    Replies: 3
    Last Post: 05-28-2014, 02:36 PM
  3. Grafik Eye QS vs WPM?
    By schalliol in forum Design Assistance - RA2
    Replies: 2
    Last Post: 05-15-2014, 01:16 AM
  4. Grafik Eye
    By Petar in forum Troubleshooting - Legacy HW
    Replies: 6
    Last Post: 04-25-2014, 07:59 AM
  5. Flickering lights on Grafik Eye
    By AngusM8 in forum Troubleshooting - HWQS
    Replies: 2
    Last Post: 11-04-2013, 05:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •