Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: 7-Pin terminal block for Lutron Sivoia QED

  1. #1
    Junior Member
    Join Date
    Feb 2014
    Posts
    14

    7-Pin terminal block for Lutron Sivoia QED

    Where can I get these? The previous installer never terminated the cable that is coming out of the wall.

  2. #2
    Authorized Lutron Contributor
    Join Date
    Jun 2013
    Posts
    91
    These connectors come in the hardware kit that ships with the shades. If you are a Lutron Shading dealer, you can order them directly. If you are the homeowner, go to the "where to buy" link in the upper right corner of the www.lutron.com web page to find a local dealer.

    The 7-pin connector is part #443338

  3. #3
    Junior Member
    Join Date
    Feb 2014
    Posts
    14
    Thank you.

  4. #4
    Junior Member
    Join Date
    Feb 2014
    Posts
    14
    Is that the connector to the motor or the cable coming out of the wall? I need the female end.

  5. #5
    Authorized Lutron Contributor
    Join Date
    Jun 2013
    Posts
    91
    This is the part number for the connector you would screw onto the wire coming out of the wall. On the shade drive side the connector is permanently crimped to the drive wire.

Similar Threads

  1. Terminal utility for configuring QSE-CI-NWK-E
    By keithwemp in forum 3rd-party Integration - Shades
    Replies: 3
    Last Post: 06-04-2014, 11:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •