Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: LHC+ Level Editing and Cycle Dim

  1. #1
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513

    LHC+ Level Editing and Cycle Dim

    When designing a system, please be aware that a keypad button cannot have both cycle dim and level editing available at the same time. When choosing buttons to enable cycle dim, these scenes will not be available in the Lutron Home Control+ app for level editing, just normal operation.

  2. Likes Eric H. liked this post
  3. #2

    Cycle Dim = no level edit ?forever?

    Will this conflict always be present or will this be changed in future software releases?

    Recently noticed that level editor is duplicating loads assigned to 'press' and 'hold' programming which makes using either level editor with shared loads in the 'press' and 'hold' functions, troubling

    Quote Originally Posted by Armando B. View Post
    When designing a system, please be aware that a keypad button cannot have both cycle dim and level editing available at the same time. When choosing buttons to enable cycle dim, these scenes will not be available in the Lutron Home Control+ app for level editing, just normal operation.

  4. #3
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    403
    We mocked up a system here and when using level editing in the Lutron Home Control+ app the levels for the lights on the press were the only lights affected. Can you please send the project file you noticed this issue with to hwsupport@lutron.com indicating which button you noticed this issue on and which loads where affected?
    Last edited by Kevin P.; 03-07-2014 at 09:07 AM. Reason: fixed email address

  5. #4
    Does this also apply to the Connect App? Does enabling cycle dim essentially disable button editing?

  6. #5
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello totesthouse,
    Page 41 of the app guide has a table that shows button editing limitations based on button type. http://www.lutron.com/TechnicalDocum...-App-Guide.pdf
    Thanks.

Similar Threads

  1. HWQS - just too slow to catch double tap and cycle dim ?
    By JDearden in forum Troubleshooting - HWQS
    Replies: 12
    Last Post: 05-11-2014, 04:29 PM
  2. Setting shades to a specific level?
    By thefish in forum Programming - HWQS
    Replies: 2
    Last Post: 10-30-2013, 09:56 AM
  3. "Unaffected" invisible in Level Editor
    By LightBrigade in forum Programming - HWQS
    Replies: 1
    Last Post: 10-15-2013, 11:25 AM
  4. dimmer not going back to last level
    By Craig W. in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 05-16-2013, 03:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •