Im trying to trigger lights to come on through the VCRX. Im using beams with a photocell. Not sure how to program this to turn on and then turn lights back off after a certain amount of time
Im trying to trigger lights to come on through the VCRX. Im using beams with a photocell. Not sure how to program this to turn on and then turn lights back off after a certain amount of time
TO ELABORATE MORE ON THIS, WEN YOU TRIP THE BEAM IT WILL TURN ON A TIMER AND THAT WIL SEND THE SIGNAL TO THE VCRX cci. THIS IS WHERE IM NOT SURE ON HOW TO PROGRAM LIGHTS TO TURN ON THEN OFF AFTER A FEW MINUTES
RR2 has a decent clock but does not have any timers. You could do this by using 2 CCIs at the same time. The first would turn the lights on. The second would turn the lights off after a delay. You may have to right click on the load list (in programming screen) and select "show delay."
What is the photo cell doing in this application?
Convergence Technologies Raleigh, North Carolina
www.convergenceusa.com