Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Trying to rebuild project

  1. #1

    Trying to rebuild project

    I bought a house with an older RadioRa system installed. I've completed the training and gained access to RR Essentials 12.1. First tried to transfer the project, but error no project found. So, began rebuilding the project from scratch. Recreated my zones and controls as a new project, removed each control and copied the serial number into the system. Have programed as desired (simple three room system). When I go to activate, none of the device are responding by SN. Not sure where to turn next. Any ideas?

    This all started trying to add a simple connect bridge for home automation purposes. One of those projects I wish I never started.

  2. #2
    Quote Originally Posted by jakejacobson View Post
    I bought a house with an older RadioRa system installed. I've completed the training and gained access to RR Essentials 12.1. First tried to transfer the project, but error no project found. So, began rebuilding the project from scratch. Recreated my zones and controls as a new project, removed each control and copied the serial number into the system. Have programed as desired (simple three room system). When I go to activate, none of the device are responding by SN. Not sure where to turn next. Any ideas?

    This all started trying to add a simple connect bridge for home automation purposes. One of those projects I wish I never started.
    You need to initialize each control. Press 3x quickly, Hold (wait for the LED's and light to flash), Press 3x again and release.

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    209
    I'm working with Inclusive but, on the left side of the activate screen click on the "advanced options" text. Try using the reactivate all devices.

    Your devices may think they are part of another system and don't want to enroll in the new system. You may have to set them back to factory defaults. It's a safeguard to keep a neighbor from enrolling your devices in their system.
    LED, Inc.
    10401 Cokesbury Ln
    Raleigh, NC 27614

  4. #4

    tried that

    thanks for the quick response. Forgot to mention I tried that, not the issue.

  5. #5
    Quote Originally Posted by jakejacobson View Post
    thanks for the quick response. Forgot to mention I tried that, not the issue.
    Try activating without the serial number. Highlight the control in the file and press and hold.

  6. #6
    I don’t have that option in essentials. I have reset all controllers to factory default: 3 taps and hold. I can’t figure out how to reset the keypad to factory but frankly don’t want to do that until I know the new program is going to upload. Don’t want the keypad to stop working. Any other ideas.

    Can thank you all enough. Amazingly quick responses here...

  7. #7
    That isn’t working either. One question, when I created the new program I’m not able to find the exact model dimmer I’m dealing with. The system is built with 6D dimmers, but only thing close I can find in the software is 6ND. Assume N is for neutral, does that matter?

  8. #8
    3 taps and hold.? Are you following it with another 3 taps? The lights will flash if successful.

  9. #9
    Yes. 3 taps hold; 3 taps. Can anyone recommend a RadioRA certified installer in the Minneapolis area?

  10. #10
    Yes, it matters. Look on the right side under the Model Number, "Choose alternate model", and try the 10D. That may work. Otherwise call Lutron.

Page 1 of 2 12 LastLast

Similar Threads

  1. Few issues with new project
    By nobra in forum Troubleshooting - RA2
    Replies: 5
    Last Post: 03-21-2016, 01:46 PM
  2. Extracting Old Project File
    By chromathegreat in forum Troubleshooting - RA2
    Replies: 2
    Last Post: 01-03-2016, 12:55 AM
  3. Project Help
    By tome10@aol.com in forum Design Assistance - HWQS
    Replies: 6
    Last Post: 12-29-2015, 02:39 PM
  4. Corrupt project file
    By acculite in forum Troubleshooting - RA2
    Replies: 0
    Last Post: 09-07-2015, 04:24 PM
  5. extract project
    By iControl in forum General Discussion - RA2
    Replies: 2
    Last Post: 01-30-2015, 11:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •