Thanks Thanks:  0
Likes Likes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Trying to rebuild project

  1. #11
    Junior Member
    Join Date
    Jan 2018
    Posts
    12
    Ran a test with one control, 10ND seems to work using the manual activation. How do I reset the keypad to factory defaults?

  2. #12
    Junior Member
    Join Date
    Jan 2018
    Posts
    12
    So canít thank you all enough. 10ND is working. Have everything activated and mostly working. Alexa can turn scenes on, but scenes donít turn off at the keypad or via Alexa, so more trouble shooting to do tomorrow.

  3. #13
    Junior Member
    Join Date
    Jan 2018
    Posts
    12
    Thanks again to all for the help last night. All working now and fully voice enabled! Issue with the keypad was a simple fix, was using scenes rather than toggle (I wanted each button to turn on/off a group of lights)

    Now on to expanding the simple system to automate the rest of the house.

  4. #14
    Quote Originally Posted by jakejacobson View Post
    Thanks again to all for the help last night. All working now and fully voice enabled! Issue with the keypad was a simple fix, was using scenes rather than toggle (I wanted each button to turn on/off a group of lights)

    Now on to expanding the simple system to automate the rest of the house.
    Glad I/We could help. Good luck.

  5. #15
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,091
    Yes! The 6D is a legacy model. Use 6CL and the software will accept the physical 6D.
    LED, Incorporated
    Raleigh, NC 27614

  6. #16
    Junior Member
    Join Date
    Dec 2017
    Posts
    8
    jakejacobson and others. I am having issues with a temperature event in my RR2 system (see another thread). I've decided to make a new project with just the repeater, HVAC controller, seeTemp, and the two wireless temperature sensors. When I go to activate I get errors. This may be what randyc referred to regarding belonging to another system. Do I only need to deactivate the 3 devices (other than the repeater) that I will use in this new project? It seems that the repeater takes care of itself when I press Start Activation. The triple tap method on the HVAC controller is supposed to return it to factory settings. Is the the same thing as deactivation? The installation instructions for the seeTemp (https://www.lutron.com/technicaldocu...y/367-2020.pdf) say to use the triiple tap method to return to factory settings. However the last line says this will return the HVAC to factory settings? Do you think this a typo, like a cut-and-paste error? Finally, the temperature sensors did not have a spot for a serial number on the Activation page. I know they have serial numbers but found no instructions for deactivating. Can all these be deactivated from the project now running?

    If I decide to go back to the project currently in use (it is much bigger and has scenes), will I have to go through the deactivation/reactivation steps for the devices above? I think the answer is probably yes.

    Question for jakejacobson. How did you finally deactivate devices? You indicated the 3-taps method was not working for you.

    I hope it was OK to append to this thread. Thanks in advance.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Few issues with new project
    By nobra in forum Troubleshooting - RA2
    Replies: 5
    Last Post: 03-21-2016, 12:46 PM
  2. Extracting Old Project File
    By chromathegreat in forum Troubleshooting - RA2
    Replies: 2
    Last Post: 01-02-2016, 11:55 PM
  3. Project Help
    By tome10@aol.com in forum Design Assistance - HWQS
    Replies: 6
    Last Post: 12-29-2015, 01:39 PM
  4. Corrupt project file
    By acculite in forum Troubleshooting - RA2
    Replies: 0
    Last Post: 09-07-2015, 03:24 PM
  5. extract project
    By iControl in forum General Discussion - RA2
    Replies: 2
    Last Post: 01-30-2015, 10:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •