-
Universal Remote Control & Caseta
I have read the white paper on integrating URC to the Lutron Caseta Bridge, Caseta products use the bottom button for teaching , the URC manual makes reference to the Lutron Maesrto line with a middle button for syncing. Should I assume Caseta is not possible, assistance appreciated, comments welcome.,
-
Anyone? I too am looking to see if I can use DemoPad with Lutron's Caseta system? Right now I have the native Lutron software installed, however I would rather like to have the ability to control my system from the remote's interface without having to roundtrip it back and forth when wanting to control something.
-
If you are looking to integrate Caseta with URC, you must have a Caseta Pro bridge (model #L-BDGPRO2-WH).
The Caseta controls can't be linked to URC without it.
You would set up the Caseta system via the Caseta app, and then use the URC drivers provided by URC.
-
@Brian W,
Does the Caseta Pro Bridge support "Telnet Control"? I inquired with the maker of the URC software I am using and they said if it supports telnet control it will work. Can you confirm this before I go out and purchase the Pro version.
Thanks
-
Yes, the Pro bridge suppotrs Telnet control.
In the Caseta app, go to Settings > Advanced > Integration, and make sure Telnet Support is turned on.
-
Originally Posted by
Brian W.
Yes, the Pro bridge suppotrs Telnet control.
In the Caseta app, go to Settings > Advanced > Integration, and make sure Telnet Support is turned on.
Lutron Caseta L-BDGPRO2-WH is this the correct model number?
-
Yes, L-BDGPRO2-WH is the correct model number Caseta bridge to work with URC.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Originally Posted by
Brian W.
Yes, L-BDGPRO2-WH is the correct model number Caseta bridge to work with URC.
@Brian W.
Thank you!
-
What kind of URC control are you planning? Is it via MRX1 or 2? Isn’t that the only oiece with lan control?
-
Lutron URC & Caseta
@Brian W. - My entire home has Lutron URC dimmers. Does this mean that I can setup a Caseta Smart Bridge Pro and control my URC dimmers through it? End goal is to be able to get rid of the URC remote and use a smart phone.
Any info here is much appreciated!