Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: My first schedule/scene.....Help

  1. #1
    Junior Member
    Join Date
    Jan 2018
    Posts
    3

    My first schedule/scene.....Help

    I am trying to create my first schedule for a wall dimmer via a smartbridge.
    I have set up a schedule to turn the light on and a separate schedule to turn the light off. Both schedules are active.
    The light neither turns on or off at the set time. I have set up a scene with the appropriate light but do not see the connection between the scene and schedules for that light.
    Some documentation would be helpful. any links?? I am obviously missing a few steps!

  2. #2
    Senior Member
    Join Date
    Mar 2017
    Posts
    113
    Have you made sure the dimmer is "activated'? Can you turn the light on and off that is controlled by that dimmer using the app?

  3. #3
    Junior Member
    Join Date
    Jan 2018
    Posts
    3
    I can turn the dimmer on and off through the apps

  4. #4
    Lutron Technical Support
    Join Date
    May 2013
    Posts
    635
    Have you tried creating a Scene with that light? If so, does it work?
    How far (in feet) is that dimmer away from the Caseta bridge?

  5. #5
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    I have been doing lighting control for a while. I still stumble on a couple of issues.

    1. Make sure you have the AM/PM reference correct. I use 12:01 to help avoid the DOH! moments.
    2. Make sure you have the levels set correctly. I still sometimes get the on/off settings backwards. DOH!
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  6. #6
    Junior Member
    Join Date
    Jan 2018
    Posts
    3
    Thanks for the suggestions but the schedules magically work today. I suspect that Saturday is not a good day to program a weekly schedule because it is at the "end" of the program week.
    I still struggle with the use of scenes. Grouping several devices into a scene does not appear to define anything because the "on" /"off" definition along with the active flag and weekday are all in the schedule for a given device.
    What am I missing?

Similar Threads

  1. Replies: 0
    Last Post: 09-21-2017, 07:06 PM
  2. Ability to set a fixed schedule?
    By bigpapi in forum General Discussion - CAS
    Replies: 4
    Last Post: 08-31-2016, 02:48 PM
  3. Holiday Lighting Schedule
    By TurnipTruck in forum Programming - HWQS
    Replies: 3
    Last Post: 02-23-2016, 09:37 AM
  4. How to edit Lights in Events schedule
    By dffdff in forum General Discussion - HWQS
    Replies: 6
    Last Post: 09-22-2014, 09:31 AM
  5. Load Schedule Problems
    By excel in forum Design Assistance - HWQS
    Replies: 0
    Last Post: 02-28-2014, 12:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •