Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: MS-OPS5MH Won't Turn On

  1. #1
    Junior Member
    Join Date
    Jan 2018
    Posts
    1

    MS-OPS5MH Won't Turn On

    I installed what I thought was correctly.. the green/silver wire went to the common white wire, the black went to black, the black went to red. I can hold and program the switch - the orange light blinked. I put it to manual turn on, auto off. I clicked the big button. The light did not turn on. What did I do wrong??

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    There is no neutral connection on the MS-OPS5. The green/silver wire should connect to the ground.

    You mentioned a red wire. This might indicate a 2nd switch location. The MS-OPS5 will work with a single 3-way switch but the wiring will need to be modified per the installation instructions. If you have more than 2 locations you will need MA-AS companion switches in the other locations.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. MS-OPS5MH 4 -way use question?
    By Luke_Y in forum General Discussion - Controls
    Replies: 1
    Last Post: 01-25-2018, 01:02 PM
  2. Installation of MS-OPS5MH sensor for 3-way Switches
    By KennethTong in forum General Discussion - Controls
    Replies: 1
    Last Post: 02-23-2017, 04:25 PM
  3. RD-RD will turn light on, but not off
    By johngalt in forum Troubleshooting - RA2
    Replies: 5
    Last Post: 02-22-2016, 08:35 PM
  4. Double Tap to Turn Off?
    By JeffreySkalny in forum Programming - HWQS
    Replies: 1
    Last Post: 01-05-2016, 08:33 AM
  5. Cannot Eliminate 2-Second Turn Off
    By David Haddad in forum Troubleshooting - HWQS
    Replies: 5
    Last Post: 11-05-2015, 09:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •