Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Replacement of GRX-3106

  1. #1
    Junior Member
    Join Date
    Jan 2018
    Posts
    1

    Replacement of GRX-3106

    I have a GRX-3106 that is at least 15 years old. The system died over Christmas, I managed to jumper out part of the system just to get the lights back on. Problem is most likely a bad pushbutton. My understanding is that GRX-3106 is no longer supported by Lutron. So, what would be a good replacement for the GRX-3106? And how do I go about ordering it.

    Thanks, Hjalmarson

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello Hjalmarson,
    Thank you for your post. The current replacement would be a Grafik Eye QS. http://www.lutron.com/en-US/Products.../Overview.aspx

Similar Threads

  1. GRX 3106 failure
    By nickmarmont in forum Troubleshooting - Legacy Other
    Replies: 1
    Last Post: 03-16-2019, 09:27 AM
  2. Replacement Drivers
    By Gpack in forum General Discussion - HWQS
    Replies: 2
    Last Post: 10-07-2016, 03:37 PM
  3. Dead GRX 3106 Grafik eye
    By SparkyCoog in forum Troubleshooting - Legacy Other
    Replies: 2
    Last Post: 05-11-2016, 10:55 AM
  4. Grafik eye 3106 help
    By EWP205 in forum Design Assistance - Legacy HW
    Replies: 4
    Last Post: 10-27-2014, 07:06 PM
  5. Replies: 5
    Last Post: 10-20-2014, 10:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •