I have connected the Lutron PD-6ANS to control an outlet. But have an issue with it working properly, so I am not sure if its a problem with the wiring, or the switch cannot be used like this.
When i turn on the switch, the lights connected to the outlet do not turn on, I have to unplug them and replug them ( I don't have to turn the switch on or off again), and it will turn on. It makes no sense to me. its like power is at the outlet, but I still have to unplug and replug. The outlet is a regular outlet. I had a regular switch before and everything worked fine.
I know this is not much of an explanation, but I am hoping someone here has more experience with this sort of setup to tell me if I should look at the wiring or just give up on trying to use the switch in this scenario.
Thanks