I am taking over the management of a system from previous installer. Is there a easy way to download the existing project from the main repeater?
Thanks
I am taking over the management of a system from previous installer. Is there a easy way to download the existing project from the main repeater?
Thanks
Tools, extract.
I believe the file on the processor must be 6.0 or later. I think you have to be connected to the Internet but would not swear to it.
Convergence Technologies Raleigh, North Carolina
www.convergenceusa.com
Does anyone know if extraction can be done with Essentials, or is Inclusive required? Another post implied that Inclusive was necessary for extraction. I am working on the online course to get Essentials, so that's why I don't know the answer myself. It would be a bummer though. I understand that a firmware update wipes out all programming.
Ian
Extraction was added to Essentials starting in the 11's, I believe. If your firmware matches your software version, extraction should go off without a hitch. That being said, extraction was always the most difficult part. Make sure you do have a live internet connection as well as hardwire to the repeater (via the network or direct). Extraction where the firmware and software does not match will use Lutron's cloud server and take a bit of time.
Simple automation when DIY isn't working
intuitivehomecontrols@gmail.com
fb.me/intuitivehomecontrols
I'm glad it was added to Essentials, I thought it was a silly limitation to not provide that utility in the Essentials software. Recently I took over a system that was running 11.6 (or some odd version number) I had 11.5 and 12.0, the support site removed the intermediate versions that the previous installer used and there was no Internet access at the site. I ended up removing the repeaters and doing the extraction and firmware upgrades at my office.