Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Occupancy Sensor Questions for QS

  1. #1
    Junior Member
    Join Date
    Oct 2013
    Posts
    21

    Occupancy Sensor Questions for QS

    I'm using HomeWorksQS 10.7.0. Occupancy sensor is LRF2-OCR2B-P. I have added them, and programmed the lights I want to come on and off with them. They work. Other than adding Grace Period I haven't done anything else. My questions is, what is the default timeouts for going from occupied to unoccupied and is this programmable? I don't see anywhere to do this. I see how to program the lights and the fades, but not the time that has to go by before the sensor would go from occupied to unoccupied.

    Thank you in advance for any info.
    J. Alexander Luty
    iQ Electronic Interiors, Inc.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    The default is 15 minutes. You can set it to 1, 5, 15, or 30 at the sensor itself. You can add up to 300 minutes in the HQS software.

    There is also a "low-light" feature that will only turn the lights on automatically if there is not already sufficient ambient light in the room. If you already have the lights on, the sensor won't turn them off because you walk in and sit down.

    http://www.lutron.com/TechnicalDocum...ry/041341a.pdf
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    Oct 2013
    Posts
    21
    Thank you randyc. That's the info I needed.
    J. Alexander Luty
    iQ Electronic Interiors, Inc.

Similar Threads

  1. Occupancy sensor question
    By ErikU in forum Troubleshooting - RA2
    Replies: 4
    Last Post: 12-12-2017, 03:27 AM
  2. Occupancy Sensor. Can this be done?
    By whirredup in forum Programming - RA2
    Replies: 5
    Last Post: 04-21-2017, 05:06 PM
  3. Querying Occupancy Sensor (LRF2-OC) and Remote Temp Sensor (LRF2-TWRB)
    By Fiasco in forum 3rd-party Integration - RA2
    Replies: 7
    Last Post: 11-12-2016, 07:17 AM
  4. Occupancy Sensor Questions
    By JeffreySkalny in forum Programming - HWQS
    Replies: 1
    Last Post: 01-05-2016, 09:01 AM
  5. Occupancy Sensor
    By texas doc in forum General Discussion - RA2
    Replies: 4
    Last Post: 05-18-2015, 09:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •