Grafik eye QS Keypads

[savimagc]

I have a system with 4 Grafik Eye QS with 5 keypads (QSWS2-3BI-WH) already working, by mistake i ordered the Keypad model.-QSWS2-1BI-WH but i needed the QSWS2-3BI-WH, is there a way to convert it to a 3 button Keypad (factory default maybe), thanks a lot for your help.

[randyc]

The keypad under the button kit is a the same for all the non-IR QSWS2 keypads. You can order a replacement button kit in any button configuration. The retail price is $75US.

I like to use the 5 button raise/lower. I find it better to have a button that doesn't get used rather than need another one and not have it. If you want to engrave them, call them scene 1, scene 2, etc.

[savimagc]

Thanks for the information, but how do i program the buttons, i have tryed the 1&5 with no luck, only works if i press the button that comes originally with the keypad.

[randyc]

You must activate the new buttons. The directions are here:

http://www.lutron.com/TechnicalDocum...ary/048428.pdf

[savimagc]

Thanks a lot Randy for your help.

[Consoldier]

Very good post, thank you. I am surprised to find your website