Thanks Thanks:  2
Likes Likes:  0
Dislikes Dislikes:  0
Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: series 4 keypad malfunction - what do these lights mean??

  1. #21
    Junior Member
    Join Date
    Nov 2017
    Posts
    20
    bit more info - (blown fuse should read blown bulb in one of the lamps) - I was hoping it might just be a faulty MCB that might be easy enough to replace, it seems to be working fine in terms of the switch, but there is no power to the sockets when tested with a voltmeter, and also by plugging in the lamps.

    I did notice that when I flicked the MCB up and down, there was a clicking from the WPM's, I'm assuming this means there must be a current coming from the MCB. When switching on all circuits by pressing the buttons on all the WPMs, everything comes on except these two lamp sockets.

    Does this smell like a possible Lutron problem?

  2. #22
    Junior Member
    Join Date
    Nov 2017
    Posts
    20
    ...duplicate post

  3. #23
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Does anything work in the sockets? You may have another device tripped. It could be a GFCI or AFCI receptacle. Maybe a fuse or breaker.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  4. #24
    Junior Member
    Join Date
    Nov 2017
    Posts
    20
    identified it after lots of checks - one of the zone outputs on the WPM isnt working. fortunately, of the six zones, only four were being used, so I was able to test the wiring and fuses by attaching the socket output to another zone and energising all the outputs of the WPM - which showed the sockets were working fine.

    Which intern means I need to reprogram the relevant wall switches to switch from one zone to the replacement zone on the relevant WPM - which means ill have to unfortunately get in touch with the original installers for the software and file, and hope to do it myself, or have them do it for me...

Page 3 of 3 FirstFirst 123

Similar Threads

  1. Signature series keypad
    By ronniekjr in forum General Discussion - HWQS
    Replies: 1
    Last Post: 10-05-2017, 11:33 AM
  2. HWI European Keypad compatible with Grafik Eye GRX-3000 series?
    By lighthoos in forum General Discussion - Legacy HW
    Replies: 1
    Last Post: 04-13-2017, 04:24 AM
  3. GRX-MR-3 malfunction
    By pahidla in forum Troubleshooting - Legacy HW
    Replies: 3
    Last Post: 09-22-2015, 01:05 PM
  4. Replies: 0
    Last Post: 10-27-2014, 06:00 PM
  5. Single seeTouch Keypad for Lights and Shades
    By dinom in forum General Discussion - RA2
    Replies: 1
    Last Post: 09-05-2014, 09:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •