Trying to run a standard, three speed Hunter fan with a 6ANS and having some issues.
Fan off. I can get to on one of two ways:
1) Turn on switch, fan does not respond. Pull bypass tab, push tab back in, fan turns on. (This works at any fan speed)
2) Turn on, fan does not turn on. Cycle speed cord from high, to med, to low, to off, back to high. Fan turns on when it gets back to high.
Things that do not work:
1) Switch in off position, pull tab, push tab, turn on.
2) no remote controls work, except by using same procedures.
Thoughts here?