I’m currently installing a new Caseta system, and have run into a problem. One switch, a PD-6ANS-WH, covers a circuit with two outdoor LED lights. Both of the bulbs (one Cree, one Ecosmart) are on Lutron’s supported LED list for dimmers. If the switch has been off for some time, the lights turn on nearly instantly when the switch is turned on. However, if the switch is turned off then on again it takes anywhere from 10-20 secconds (timed over several trials) for the lights to come on.
I’ve searched through the forums and haven’t come up with a definitive answer. The green LED on the switch appears to be operating normally, and the lights always do eventually light. AFAICT, this indicates against a miswiring situation. Any ideas?