Hello,
I'm curious if you can have a dumb switch and a caseta smart switch in the same gang. Does the wall plate cover accommodate a regular paddle switch?
Hello,
I'm curious if you can have a dumb switch and a caseta smart switch in the same gang. Does the wall plate cover accommodate a regular paddle switch?
No, Caseta switches will take the whole space. If you need two devices, you'll need a two gang box. No "stack" devices.
You could use a Pico next to the dumb paddle switch and have the Caseta switch or dimmer elsewhere. You would be able to effectively float the Pico over the wall in a two gang plate attached to the single gang box with the dumb switch.
Simple automation when DIY isn't working
intuitivehomecontrols@gmail.com
fb.me/intuitivehomecontrols
Oh thanks for the reply. I may not have articulated my question well. I have a 2 and 3 gang box. I have the Claro 2 and 3 gang plate on order, but I only want 1 or 2 Caseta switches and 1 regular dumb switch (Decor style). I was worried about the dumb switch not fitting flush with the wall plate.
I guess is the Claro wall plate cover usable with other switches than the Caseta
- - - Updated - - -
Oh thanks for the reply. I may not have articulated my question well. I have a 2 and 3 gang box. I have the Claro 2 and 3 gang plate on order, but I only want 1 or 2 Caseta switches and 1 regular dumb switch (Decor style). I was worried about the dumb switch not fitting flush with the wall plate.
I guess is the Claro wall plate cover usable with other switches than the Caseta