-
Occupancy Sensor stopped working after 11.6 update
Never had this issue before. Updated to 11.6 and now one of my occupancy sensors stopped working correctly. I can press the test buttons and the sensor functions as it should (sees motion and turns lights on and off via test buttons) but it does not turn on lights when motion is present. I check the programming in the software and it's set up correctly. Any ideas?
-
I had 11.6 running for a while with many sensors and had no problems. I have run into problems where a download doesn't complete and left the main repeater in an "odd state". This affected motion sensors and Pico remotes, but not always. The solution was hard-power cycling the main repeaters and doing the firmware update and transfer again.
-
Post Thanks / Like - 1 Thanks, 0 Likes