Thanks Thanks:  1
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Maestro MACL-153M Dimmer NOT TURNING OFF - Flashes/Blinks instead

  1. #1
    Junior Member
    Join Date
    Oct 2017
    Posts
    1

    Maestro MACL-153M Dimmer NOT TURNING OFF - Flashes/Blinks instead

    Hello,
    I recently moved into a new condo. I believe we have a Lutron Maestro MACL-153M Dimmer Switch in the bedroom. When trying to turn it off it dimms down to the lowest setting then flashes/blinks. I cannot turn off my lamp through the switch, only manually. We are using an approved Ecosmart A19 60W lightbulb.
    Any help would be great! Thanks!!!

    Click image for larger version. 

Name:	IMG_2997.JPG 
Views:	8 
Size:	16.5 KB 
ID:	680

  2. Thanks Justin F. thanked for this post
    Likes Justin F. liked this post
  3. #2
    Hello mattlabbie,
    Thank you for your post! If you replace the LED bulb with an incandescent or halogen bulb and the problem goes away, this is the result of an incompatibility between the bulb and dimmer. If you replace with incandescent or halogen lamps and the problem persists, I would recommend calling in to Lutron Tech Support @ 1-888-Lutron1 (588-7661) to do some additional troubleshooting. If we feel there is potentially a defective dimmer, we will send out a replacement to you.

    Hope this helps!

    -JustinF.

  4. #3
    Junior Member
    Join Date
    May 2019
    Posts
    1

    Cl maestro

    After just one month, one of my led can lights will flash really low when you turn on lights, if you turn them on then off right away, they come on as they should but on a “cold” turn on it flashes . They worked fine without any issues til now. There is 8 can lights - they draw 13w and two pendant lights that draw 5w on this switch... currently have just a reg 3way on and off switch going to lights and they work fine , of course no dimming tho☹️.... any feedback would be greatly appreciated.

  5. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,091
    The "pop-on" you described could be a compatibility issue (even though it worked for a month). I think it is more likely a wiring issue. You can use a mechanical 3-way switch with the CL dimmer but it does require a little different wiring method.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Replies: 1
    Last Post: 05-02-2017, 04:22 PM
  2. Double checking on how to wire Maestro MACL-153M
    By boblite in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 02-14-2017, 04:15 PM
  3. Problem with Maestro CL Dimmer MACL 153M
    By chrbar in forum General Discussion - LED
    Replies: 1
    Last Post: 09-29-2016, 01:41 PM
  4. Bulbs too dim after installing Lutron MACL-153M-WH Maestro dimmer
    By tyger in forum Performance Issues - LED
    Replies: 3
    Last Post: 12-01-2015, 05:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •