Thanks Thanks:  1
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: Programming QS to control a 2 channel DMX fixture

  1. #1

    Post Programming QS to control a 2 channel DMX fixture

    Any one have any experience with EVO-LITE, their 2 channel LED panels, or any 2 channel DMX fixture in HWQS? The lighting load is four EVO-LITE LumiSheet tunable LED panels, 2 DMX channels each (CH1 warm, CH2 cool).

    I have limited experience with DMX in general, none in QS yet. I read Lutron's 15 page "Using_HWQS_to_Control_DMX_Outputs", created a mock database, added the QSE-DMX, and tried to add a 2 channel load, but my only options were 1 channel and 3 channel.

    Any insight would be appreciated.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    433
    What Led/DMX driver did they give you ?

  3. #3
    I can't seem to attach the .pdf. It's the EVO-LITE LT8030.

  4. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    433
    I think you need to use 2. one channel setups to tune the panel to the white you want. You will need to make scenes for client on a button press. Basically dimming 2 different led strips from what i can tell since the led are not changing colors I think your just dimming them. Im wondering why you even need DMX for this setup. I would think 2 separate dimmers could accomplish the same thing. If remember correctly Lumisheild is PWM dimming so you still would have to do 0-10 or DMX like you're doing.

    keep in mind from eco lite site



    Tunable White CCT LED Control: Our tunable white LEDs utilize separate warm and cool white channels for color mixing. 3rd party controls must account for proportional balancing/mixing of the two channels. Example: 3000K (Warm White) = 3000K 100% ON & 6500K (Ultra White) OFF, Balancing/Mixing of both = 3000K 50% ON & 6500K 50% ON, 6500K = 3000K OFF & 6500K 100% ON. Both channels cannot be allowed to operate at 100% simultaneously as the LED are not engineered to handle such high current.

  5. #5
    Thank you mcingarella!

  6. Thanks Blair S. thanked for this post
  7. #6
    Junior Member
    Join Date
    Nov 2017
    Posts
    1
    who know electrical wire grafik eye QS?

Similar Threads

  1. Tricky Curtain control programming
    By Mario in forum Programming - HWQS
    Replies: 6
    Last Post: 10-14-2016, 06:57 AM
  2. Cannot connect to IFTTT channel
    By Alanshieh in forum 3rd-party Integration - CAS
    Replies: 0
    Last Post: 12-20-2015, 03:44 PM
  3. Replies: 1
    Last Post: 11-06-2015, 10:50 AM
  4. Replies: 1
    Last Post: 06-01-2015, 10:13 AM
  5. Can you change the RF channel in RA2 like you can in HomeworksQS?
    By GMHunt in forum General Discussion - RA2
    Replies: 1
    Last Post: 09-30-2014, 02:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •