Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: QS Wired with NWK-E with PICO control via QMS2-4W-C

  1. #1
    Junior Member
    Join Date
    Feb 2014
    Posts
    3

    QS Wired with NWK-E with PICO control via QMS2-4W-C

    I am working on an install that was originally designed to be integrated with a Crestron system by others. Unfortunately the Crestron group dropped the ball and did not 1) wire for any bedroom keypads or 2) want to integrate the Caseta Smart Bridge Pro i provided them.

    So after some research I decided my best option would be to complete the install using the QMS2-4W-C and some Picos and each room will have its own Pico

    Here's what I have and I will get to the question in a minute:
    QS Wired shades
    Shades wired to QSPS-P2-10 (I believe) with open ports
    NWK-E
    and 3 QMS2-4W-C not installed yet

    My plan is to use at least 2 QMS2-4W-C's ... one on the main floor where the some blinds and the power panel is located and another on the top floor where there are 3 bedrooms. I plan to mount the top floor QMS2 on the side of the valance and wire it off one of the shades. The lower one I will wire to the power panel.

    My question is first is this concept going to work?
    and second is, what wiring is required for the second QMS2 ?

    thanks!

  2. #2
    Junior Member
    Join Date
    Feb 2014
    Posts
    3
    It is actually the QSPS-10PNL power supply

  3. #3
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello smartcanada,
    Apologies for the delay in response. Based on the above description this would work. If you still require further assistance with this job give us a call at 1 888 LUTRON 1

Similar Threads

  1. Replies: 4
    Last Post: 02-25-2017, 12:36 PM
  2. HVAC Control & wired flush mount sensor
    By zgray1 in forum Design Assistance - HWQS
    Replies: 3
    Last Post: 10-11-2015, 11:41 AM
  3. RRD-2ANF and Pico Control
    By para19 in forum General Discussion - RA2
    Replies: 3
    Last Post: 10-24-2014, 12:20 AM
  4. VCRX CCO and Pico Control - Ra2 7.5.0
    By Armando B. in forum General Discussion - RA2
    Replies: 0
    Last Post: 04-18-2014, 10:19 AM
  5. Pico & RA2 control of the same shade
    By SB Smarthomes in forum General Discussion - Shades
    Replies: 1
    Last Post: 03-24-2014, 09:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •