Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Switch and dimmer programming

  1. #1

    Switch and dimmer programming

    I have a customer who recently purchased a house that has a Homeworks interactive system in it. He has found that his kids like to leave lights on through out the house and i was tasked with setting up some kind of timer for the lights that the kids use so that the lights will turn off automatically. I was able to get a delay set up for the rooms that have keypads, but i am having issues with three of the rooms. These rooms only have HWV-600D and HWV-1000NS in them. I was wondering if there is any way to set them up so they will automatically turn off after a set period of time? I get the feeling that it is impossible without some sort of Vacancy/Occupancy sensor, but i thought i would ask to see if anyone has any ideas. Any help would be appreciated.

  2. #2
    Super Moderator
    Join Date
    May 2013
    Posts
    321
    Hello BurningPhoenix,
    Thank you for your post.
    There is no other option unless you have a sensor or keypad in the space. Other options might include the use of a 3rd party system to run the logic when it gets the feedback that the light is on.

Similar Threads

  1. Confused about programming remote switch (RD-RS)
    By sdgreg in forum Programming - RA2
    Replies: 1
    Last Post: 09-03-2017, 05:11 PM
  2. Double Switch with Dimmer / Non Dimmer Combination
    By HandyMatt in forum General Discussion - Controls
    Replies: 1
    Last Post: 06-08-2017, 10:16 AM
  3. Replies: 5
    Last Post: 10-20-2016, 04:40 PM
  4. Maestro Digital Dimmer not programming the way it should
    By leftbrain99 in forum Troubleshooting - Controls
    Replies: 3
    Last Post: 07-03-2016, 10:09 AM
  5. Replies: 3
    Last Post: 01-13-2014, 08:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •