Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: panic button

  1. #1
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    403

    panic button

    How do you program a panic button to have lights flash?

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    402

    RE: panic button

    Two options are available to program a panic button in RA2.

    If you are using a third party system for integration then use a phantom button on the MR. You have an option to choose security mode.

    If you are not using a third party the only option is to wire an output on the VCRX to the security input on the VCRX. Set the output to a maintained and have it toggle from a button push.

    In the software you will need to program the Full and Flash buttons of the VCRX.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •